Induction-hardened piston rods - AK50 I.H.
The right choice for hydraulic cylinders used in the construction industry. The induction-hardened layer protects against scratching and stripping of the chrome layer caused by dust, dirt and stones.
Chemical composition
Mechanical properties
Induction hardening - I.H.
Applications - Especially for the construction industry
Construction cylinders
Hydraulic cylinders for the construction industry
Scratch protection
Resistance to chrome layer stripping
Dusty conditions
Operation in dust and dirt
Stones and abrasives
Special protection against stones and abrasives
Equivalent standards
| Angros | Asochrome | EN | DIN | BS | AFNOR | ASTM | JUS |
|---|---|---|---|---|---|---|---|
| AK50 | Asochrome 50 | C45E | CK45 | 080N45 | XC45 | 1045 | 1530 |
| Angros | EN | DIN | ASTM | JUS |
|---|---|---|---|---|
| AK50 | C45E | CK45 | 1045 | 1530 |
*CE=%C+%Mn/6+(%Cu+%Ni)/15+(%Cr+%Mo+%V)/5 - Average calculated using the maximum lower/upper values within current EN standards.
Weight table (kg/m) - Complete specification
Diameter 5-30mm
Diameter 32-80mm
Diameter 85-200mm
Complete table with precise weight specifications. For specific diameters, contact our team.
Tolerance range according to ISO 286-2 – ISO-f7 table in μm
| Size (mm) | Upper (μm) | Lower (μm) |
|---|---|---|
| up to 18 | -16 | -34 |
| >18-30 | -20 | -41 |
| >30-50 | -25 | -50 |
| >50-80 | -30 | -60 |
| >80-120 | -36 | -71 |
| >120-180 | -43 | -83 |
| >180-250 | -50 | -96 |
Corrosion resistance - Detailed specifications
The layer applied in the chrome plating process contains micro-cracks. Our products are made with a controlled micro-crack distribution. Polishing after chrome plating ensures high corrosion resistance.
Corrosion resistance is based on a salt spray test, following ISO 9227 combined with ISO 10289 for the rating evaluation.
Test standards
Standard resistance
On request, piston rods can be supplied with a thicker chrome layer and a higher corrosion resistance rating.
Packaging and marking
Packaging options
On request and at extra cost, piston rods can be wrapped in aluminium foil or packed in wooden crates.
Product marking
Each piston rod is marked with:
- • ANGROS
- • Size (diameter)
- • AK50 I.H. (material designation)
Delivery lengths
Piston rods are produced in lengths of 4.5-10 m. Standard lengths for each diameter:
Diameter <60mm
Diameter >60mm
Non-chromed sections
The non-chromed part of the piston rod, i.e. the length of bar for which the properties and tolerance of the chromed sections cannot be guaranteed:
Fixed lengths: Piston rods can also be supplied cut to a fixed, agreed length as the customer requires (the price for this is defined separately).
Welding and machining
Welding properties
AK50 welds well conventionally without any difficulty
Also suitable for friction welding without difficulty
Machining properties
The mechanical properties allow good machinability
Using appropriate tools
Certificates and quality
ISO 9001
Quality management system
ISO 14001
Environmental management
OHSAS 18001
Occupational health and safety
Interested in AK50 I.H.?
Contact us for specifications, prices and availability of induction-hardened piston rods. Our team will give you expert advice for construction conditions.
Other piston rods for hydraulic cylinders
Explore our complete product range
Hard chrome-plated steel bars
AK50 chrome-plated piston rods for hydraulic cylinders
Induction-hardened chrome-plated bars
AK65 I.H. induction-hardened piston rods for more demanding applications
Induction-hardened chrome-plated bars
AK75 I.H. induction-hardened piston rods for more demanding applications